OB3399x

GENERAL DESCRIPTION

OB3399x is a primary side regulation off-line LED lighting power switch which can achieve accurate LED current. It significantly simplifies LED lighting system design by eliminating the secondary side feedback circuitry. Proprietary Constant Voltage (CV) and Constant Current (CC) control is integrated as shown in the figure below.

The LED current (CC control) can be adjusted externally by the resistor Rs at CS pin.

OB3399x offers comprehensive protection coverage with auto-recovery features including Cycle-by-Cycle current limiting, VDD clamp and UVLO. Excellent EMI performance is achieved with On-Bright proprietary frequency shuffling technique.

OB3399x is offered in DIP8 package.

Fig.1. Typical CC/CV Curve

FEATURES

n High Precise Constant Current Regulation at Universal AC input

n Primary-side Sensing and Regulation Without TL431 and Opto-coupler

n HV MOSFET integrated

n Adjustable Constant Current and Output Power Setting

n Adjustable Constant Voltage Load Compensation

n Built-in Primary Winding Inductance Compensation

n Built-in Leading Edge Blanking (LEB)

n Cycle-by-Cycle Current Limiting

n VDD Under Voltage Lockout with Hysteresis (UVLO)

n Latched over temperature protection (OTP)

n VDD Clamp

APPLICATIONS

Low Power AC/DC offline SMPS for

n LED applications

TYPICAL APPLICATION

Product	BVdss(V)	90-264VAC	220Vac±20%
Product	Min	Open Frame	Open Frame
OB3399PAP	600	15.5W	21W
OB3399TAP-H	650	19.8W	32W
OB3399UAP-H	650	31.2W	43.5W